Research Publication

Publications in Journals:
  1. Akshit Kaplish, Anurag Choubey, Ramakant Rana, “Design and Kinematic Modelling Of Slave Manipulator For Remote Medical Diagnosis”, International Journal of Advanced Production and Industrial Engineering (IJAPIE), Special Issue on Robotics & Automation, Jan 2017. [Download]
  2. Manik Singla, Ramakant Rana, Surabhi Lata, “Microstructure and Mechanical Properties of Aluminium Based Metal Matrix Composite – A Review”, International Journal of Advanced Production and Industrial Engineering (IJAPIE), Special Issue on Materials & Manufacturing, Jan 2017. [Download]
  3. Lata Surabhi, Gupta Ashish, Jain Aditya, Kumar Sonu, Srivastava Anindya, Rana Ramakant, “A Review on Experimental Investigation of Machining Parameters during CNC Machining of OHNS”, Int. Journal of Engineering Research and Applications, Vol. 6, Issue 2, (Part – 4), February 2016, pp. 63-71. [Download]
  4. Kumar Ravinder, Lata Surabhi, Rana Ramakant, Kumar Pankaj, Kumar Abhinav, Kumar Lakshay, Kumar Jitender Verma, Lal Roop, “Investigation of Surface Morphology in EDM process using Response Surface Methodology”, International Journal Of Modern Engineering Research, Vol. 5, Issue 9, September 2015, 54-62. [Download]
  5. Kumar Ravinder, Rana Ramakant, Lata Surabhi, Kumar Sonkar Rahul, Kumar Abhinav, Pawar Shekhar, Lal Roop, “Optimization of process parameters on Over-Cut in drilling of Al-B4C MMC”, International Journal of Modern Engineering Research, Vol. 5, Issue 6, June 2015, pp. 24-30. [Download]
  6. Rana Ramakant, Lata Surabhi, Shankaran Alok, Sharma Vinay, Saraswat Amit, Lal Roop, “Modeling and Analysis of Current and Weld Speed on Weld Hardness of Steel-Cu Weldments by RSM Approach”, International Journal of Modern Engineering Research, Vol. 5, Issue 5, May 2015, pp. 8-12. [Download]
  7. Lata Surabhi, Rana Ramakant, Shankaran Alok, Sharma Vinay, Saraswat Amit, Lal Roop, “Effect Of Welding Variables On Tensile Strength Of Cu-Steel Weldments Through Design Of Experiments And Regression Model”, International Journal of Advance Research In Science And Engineering, Vol.4, Issue 4, April 2015, pp. 175-181. [Download]
  8. Rana Ramakant, Mani Adarsh, Kochhar Anmol, Wadhwa Shrey, Daiya Sandeep Kumar, Taliyan Sparsh, Lal Roop, “An Overview On Process Parameters Improvement In Wire Electrical Discharge Machining”, International Journal of Modern Engineering Research, Vol. 5, Issue 4, April 2015, pp. 22-27. [Download]
  9. Rana Ramakant, Rajput Kunal, Saini Rohit, Lal Roop, “Optimization of Tool Wear: A Review”, International Journal of Modern Engineering Research, Nov. 2014, Vol. 4, Iss.11, Nov. 2014, pp. 35-42. [Download]
  10. Kumar Ravinder, Singh, R. K. & Rana Ramakant, 2013, “Lean implementation using Value Stream Mapping: A case of Manufacturing Organization”, Industrial Engineering Journal, Vol.6 No.7.

Publications in Conferences:
  1. 1. Sri Kant Rana, Ramakant Rana and Karanpreet Singh, “Study on Friction and Wear Analysis of Tool Steel using Pin-on-disc Method”, International Conference on Advanced Production and Industrial Engineering, October, 2017.
  2. Sri Kant Rana, Sumit Kumar and Ramakant Rana, “Optimization of Temperature variations on Steel Grade EN-18 using Pin-on-disc Method”, International Conference on Advanced Production and Industrial Engineering, October, 2017.
  3. Roop Lal, Aaruni Purohit and Ramakant Rana, Optimization of various parameters on Electrical Discharge Machining using Taguchi Optimization Technique for EN-31 Tool Steel”, International Conference on Advanced Production and Industrial Engineering, October, 2017.
  4. Anupam Thakur, Ramakant Rana, Tigmanshu Sundriyal and Harsh Vardhan, “Parametric Optimization of Process Parameters on Electrical Discharge Machining using Taguchi Optimization on SS 410”, International Conference on Advanced Production and Industrial Engineering, October, 2017.
  5. Sri Kant Rana, Ramakant Rana and Surabhi Lata, “Design and Analysis of Helical Wind Turbine for Low Speed Wind Environments”, New Frontiers in Engineering, Science and Technology, 8-12, January 2018, New Delhi, India.
  6. Dileep Singh, Surabhi Lata and Ramakant Rana “Reverse Engineered Structure of Tool Post aiding Tool Tip Alignment with Work Center” International Conference on Materials Processing and Characterization (ICMPC-2017), March 17-19, 2017, Hyderabad, India.
  7. Surabhi Lata, Ankur Pandey, labhansh, Ankit Sharma, Kuldeep Meena, Ramakant Rana and Roop Lal “An Experimental Study and Analysis of the Mechanical Properties of Titanium Dioxide reinforced Aluminium (AA 5051) Composite” International Conference on Materials Processing and Characterization (ICMPC-2017), March 17-19, 2017, Hyderabad, India.
  8. Surabhi Lata, Ramakant Rana and Hitesh “Investigation of Chip-Tool Interface Temperature: Effect of Machining Parameters and Tool Material on Ferrous and Non-Ferrous Metal” International Conference on Materials Processing and Characterization (ICMPC-2017), March 17-19, 2017, Hyderabad, India.
  9. Ramakant Rana, R. S. Walia and Surabhi Lata “Development and Investigation of Hybrid Electric Discharge Machining Electrode Process” International Conference on Materials Processing and Characterization (ICMPC-2017), March 17-19, 2017, Hyderabad, India.
  10. Manik Singla, Ramakant Rana and Surabhi Lata “Microstructure and Mechanical Properties of Aluminium based Metal Matrix Composite:  A Review” , International Conference on Advanced Production and Industrial Engineering, 9-10 December, 2016. 
  11. Siddhartha Pokharia, Surabhi Lata and Ramakant Rana “A Review of Pin-on-Disc Configuration on Sliding Wear and Coefficient of Friction” , International Conference on Advanced Production and Industrial Engineering, 9-10 December, 2016. 
  12. Ankur Pandey, Ankit Sharma, Labhansh, Ramakant Rana and Surabhi Lata “A Study on Probe and Shoulder Geometry of Friction Stir Welding Tool” , International Conference on Advanced Production and Industrial Engineering, 9-10 December, 2016. 
  13. Rachit Khanna, Raghav Maheshwari, Anish Modi, Shivam Tyagi, Anupam Thakur and Ramakant Rana “A Review on Recent Research Development on Electric Discharge Machining (EDM)” International Conference of Advance Research and Innovation (ICARI-2017), January 29, 2017, Delhi, India.
  14. Ankit Khurana, Vishal Jha, Vivek Porwal, Ankit Deswal, Mayank Gupta, Surabhi Lata and Ramakant Rana “Development of Wireless Robotic Vehicle for Metal Detection” International Conference of Advance Research and Innovation (ICARI-2017), January 29, 2017, Delhi, India.
  15. Dileep Singh, Rakesh Meena, Surabhi Lata and Ramakant Rana“Redefining the Structure of Uplifting Mechanism of Tool on a Four Way Tool Post” International Conference on Sustainable Development through Research in Engineering and Management (SRDEM-2016), December 26-27, 2016, Haryana, India.
  16. Akshit Kaplish, Anurag Choubey, and Ramakant Rana, “Design and Kinematic Modelling Of Slave Manipulator For Remote Medical Diagnosis”, International Conference on Advanced Production and Industrial Engineering, 9-10 December, 2016.  [Download]
  17. Bharat Khatri, HarshitKashyap, Anupam Thakur, Ramakant Rana, “Robotic Arm Aimed To Replace Cutting Processes”, International Conference on Advanced Production and Industrial Engineering, 9-10 December, 2016. [Download]
  18. Rana Ramakant, Walia R.S., and Singla Manik”Effect of Friction Coeficient on En-31with Different Pin Materials Using Pin-On-Disc Apparatus” International Conference on Recent Advances in Mechanical Engineering (RAME-2016), October 14–15, 2016, pp. 619-624, Delhi, India [Download] [ISBN:-978-194523970-0].
  19. Lata Surabhi, Verma Nitish Kumar, Singh Chetan, Lal Roop and Rana Ramakant “Review on Morphology and Microstructure Analysis of MGO Reinforced Al Composites” International Conference on Recent Advances in Mechanical Engineering (RAME-2016), October 14–15, 2016, pp. 663-670, Delhi, India [Download] [ISBN:-978-194523970-0].
  20. Rana Ramakant, Walia R.S., Murtaza Qasim, Tyagi Mohit, “Parametric Optimization of Hybrid Electrode EDM Process” TORONTO’2016 AES-ATEMA International Conference “Advances and Trends in Engineering Materials and their Applications”, pp. 151- 162 July 04 – 08, 2016, Toronto, CANADA [Download].
  21. Rana Ramakant, Sharma Vipin Kumar, BatraMitul, Sahni Aditya, “Wear Analysis of brass, aluminium and mild steel by using pin-on-disc method”, 3rd International Conference on Manufacturing Excellence (MANFEX-2016), March 17-18, 2016, p.p. 45-48 [Download].
  22. Lata Surabhi, Jain Aditya, Gupta Ashish, Kumar Sonu, Srivastava Anindya, Rana Ramakant, “Optimizing Process Parameters for CNC Turned Parts Using Taguchi’s Optimization Technique”, 3rd International Conference on Manufacturing Excellence (MANFEX-2016), March 17-18, 2016, p.p. 7-11 [Download].
  23. Siddharth Jain, Vidit Aggarwal, Mohit Tyagi, R.S. Walia, Ramakant Rana, “Development of Aluminium Matrix Composite Using Coconut Husk Ash Reinforcement”, International Conference on Latest Developments in Materials, Manufacturing and Quality Control (MMQC-2016), pp. 352-359, 12-13 February 2016, Bathinda, Punjab India. [Download]
  24. Rana Ramakant and SinglaManik, “Designing a Haptic Arm Based on Tilt Sensor Accelerometer”, 5th International Symposium on Fusion of Science and Technology, National Agriculture Science Center, Pusa, January 18-22,2016, New Delhi, India. [Download]
  25. Rana Ramakant, Wattal Reeta, Walia Ravinderjit Singh, Mandal Adhirath, Recent Developments in Improving Efficiency of EDM – A Review“, International Conference on Smart Technologies for Mechanical Engineering (STME-2013), October 2013, Delhi, India.
  26. Mandal Adhirath, Wattal Reeta, Rana Ramakant, “Friction Stir Welding – An Overview“, International Conference on Smart Technologies for Mechanical Engineering (STME-2013), October 2013, Delhi, India.
  27. Saini Rakesh Chander, Solanki Naveen, Rana Ramakant, “Simulation and Analysis of counter Pressure Hydroforming Process” National Conference on Computer Aided Design and Technology, NCCADT-2012, April 2012.
  28. Ramakant Rana, Lokesh Kr. Kushwaha, Roop Lal, Rakesh Chander Saini, Naveen Solanki, “Critique of Laser Beam Machining” National Conference on Computer Aided Design and Technology , NCCADT-2012, April 21, 2012, Maharaja Agrasen Institute of Technology, Delhi, pp. 124- 142.
  29. Manish Sharma, Md. Qamar Tanveer, Rakesh Chander Saini, Naveen Solanki, Ramakant Rana,“Simulation and Analysis of counter Pressure Hydroforming Process” National Conference on Computer Aided Design and Technology , NCCADT-2012, April 21, 2012, Maharaja Agrasen Institute of Technology, Delhi, pp. 161- 171.
  30. Qamar Tanveer, Rakesh Chander Saini, Manish Sharma, Ravinder Kumar, Ramakant Rana Research paper named “Design Development of front Suspension shocker Mounting of XYZ Vehicle”, National Conference on Computer Aided Design and Technology , NCCADT-2012, April 21, 2012, Maharaja Agrasen Institute of Technology, Delhi, pp.148- 160.